International Journal of Mathematical, Engineering and Management Sciences
Recycled aggregates (RA) are obtained from construction and demolished waste, laboratory crushed concrete and concrete waste at RMC plants. The concrete made from recycled aggregate is known as recycled aggregate concrete. The use of recycled aggregate is very beneficial to the environment in civil works. Its usage also helps in financial saving as the cost of transportation and production energy cost of natural coarse aggregate (NCA) is reduced. In India, the recycled aggregate application in lower grade concrete work is observed. However, the effect of recycled aggregate on the strength and durability of concrete restricts its use in higher-grade work. This paper presents a series of tests carried out on recycled coarse aggregate (RCA) and recycled coarse aggregate concrete (RCAC) and test results are compared with the NCA and parent concrete made from NCA. Tests were carried out as per IS code and concrete was prepared using a two-stage mixing approach in the concrete mix design. M30 concrete mix of four RCAC samples was tested at 28 days of curing and in comparison with parent concrete, it is found that on an average compressive strength is decreased by 12.89% at 28 days curing. Adhered mortar increases the porosity of the recycled aggregate and forms a weak zone between aggregate surface and mortar. In addition, test results showed the defects in recycled aggregate and helped to identify the area where concentration is necessary to improve the quality of recycled aggregate using six sigma DMAIC methodology. Total of 12 defects were found in the process and raw material. Statistical analysis was used to evaluate the performance of all the mix made with RCA.
Patil, Suhas Vijay; Balakrishna Rao, K.; and Nayak, Gopinatha, "Quality improvement of recycled aggregate concrete using six sigma DMAIC methodology" (2020). Open Access Archive. 1825.