Split ring resonator-based bandstop filter for improving isolation in compact mimo antenna

Document Type

Article

Publication Title

Sensors

Abstract

The ever-growing expectation for high data rates has led to the introduction of multiple-input multiple-output (MIMO) technologies to wireless connectivity. Such a system requires an MIMO antenna with high isolation. At the same time, the MIMO dimension should not be compromised for achieving high isolation. Thus, isolation techniques that do not allow an increase in dimension need to be fostered for MIMO antenna design. In this paper, a novel low-profile, miniaturized MIMO antenna with high isolation was developed considering a split ring resonator (SRR)-based bandstop filter as a decoupling network. The bandstop filter was designed with a unit cell split ring resonator structure and was deployed between two closely spaced monopole MIMO antenna elements to obtain isolation as high as 39.25 dB at 2.61 GHz. Two open-circuit stub lines were attached with the MIMO feeding network to achieve good impedance matching at resonance frequency. The proposed antenna exhibited a peak gain of 3.8 dBi and radiation efficiency of 84%. It had a low envelop correlation coefficient (ECC < 0.12), high diversity gain (DG > 9.95 dB), low mean effective gain ratio (MEG 1/MEG 2 < 0.05 dB), and low channel capacity loss (CCL < 0.042 bits/s/Hz) at resonance frequency. The overall antenna dimension was restricted to 44 mm × 22 mm (0.38 λ0 × 0.19 λ0) for its easy integration in compact wireless devices.

DOI

10.3390/s21072256

Publication Date

4-1-2021

This document is currently not available here.

Share

COinS