New benzohydrazide derivative as corrosion inhibitor for carbon steel in a 1.0 M HCL solution: Electrochemical, DFT and monte carlo simulation studies
Document Type
Article
Publication Title
Portugaliae Electrochimica Acta
Abstract
The present study aimed to evaluate the inhibition effect of an organic compound, namely, (E)-N'-(2-hydroxybenzylidene)isonicotinohydrazide (BIH), for carbon steel corrosion in a 1.0 M HCl solution, by using weight loss (WL), potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). Results show that BIH is a good inhibitor, and the percentage of inhibition efficiency increases on its higher concentrations. The maximum inhibition efficiency of 94% was obtained at 5×10 M. Polarization studies revealed that the BIH compound acts as a mixed type inhibitor. EIS showed that increasing the concentration of the inhibitor led to an increase in the charge transfer resistance and a decrease in the double layer capacitance. It was found that the adsorption of this compound obeyed the Langmuir adsorption isotherm. The associated activation energies and thermodynamic parameters of the adsorption process were evaluated and discussed. The temperature effect was studied in the range from 303 to 333 K. In addition, quantum chemical calculations based on the density function theory (DFT) and Monte Carlo simulations were done to support the experimental results. -3
First Page
147
Last Page
165
DOI
10.4152/pea.201903147
Publication Date
1-1-2019
Recommended Citation
Chaouiki, A.; Lgaz, H.; Salghi, R.; and Gaonkar, Santosh L., "New benzohydrazide derivative as corrosion inhibitor for carbon steel in a 1.0 M HCL solution: Electrochemical, DFT and monte carlo simulation studies" (2019). Open Access archive. 944.
https://impressions.manipal.edu/open-access-archive/944